This boat, has been engineered to safely endure the often extreme sea conditions experienced off The Cape of Storms.The full cabin provides excellent protection from the elements for the crew whilst on extended offshore outings, and alternatively provides comfort and versatility for over night cruising and social entertainment . The catamaran hull provides excellent stability with a dry and comfortable ride, and is available with either inboard diesel engines, or with 4 stroke outboard engines. The cabin, which houses the main control station, offers comfortable seating with excellent vision to the aft deck and a clear 360 degree view of the surroundings through toughened tinted glass.The galley is located adjacent to the seating area. Forward of the seating and control station is the main double bunk and fully enclosed head. The large fly-bridge houses the dual control station and has two full length bench seats suitable for sun-tanning or lounging.
Boat weight – operational: +/- 5000 kg
Fuel – Standard capacity: 720 litres
Min H.P. (O/B 30 inch shaft): 2 x 225 HP
Max H.P: 2 x 350 HP
Two below deck storage hatches 650l each.
6 x Large hatches located on gunwales for storage.
Access hatches to battery storage on transom engine wells.
Pressurized raw water wash down system with hose and nozzle.
Retractable fresh water shower handset mounted on swim platform.
Transom door to swim platform.
2 x Access hatches to fuel tanks.
2 x Access hatches to through hull mountings and bilge pumps.
2 x Automatic bilge pumps for hull drainage.
2 x Manual bilge pumps for emergency hull drainage.
2 x Electric drain pumps for drainage of below deck storage hatches.
2 x Manual bilge pumps for emergency drainage of below deck storage hatches.
Large centre deck box for storage includung an insulated bait compartment.
Central steering console housing hydraulic steering pump,
Electronic engine controls and engine instrumentation.
Access to Port and Starboard Fwd. cabins/bunk area through timber doors.
Access to Port Aft bunk/ storage area through timber door.
Enclosed marine head with basin, for fresh water tap and hand shower complete with storage locker, mirror and access to toilet through-hull fittings and automatic bilge pump.
Port and starboard storage lockers with timber lattice doors.
L-shape bench seat located on Port side.
Bench seat located on Starboard side.
Galley area with utensil drawer unit, cupboard, 12-volt fridge, 2 plate gas stove located on Starboard side.
Basin with fresh water tap located on Starboard side.
Strategically placed handrails located overhead and throughout cabin.
Opening ventilation ports in head, bunk and saloon areas.
Escape hatch located in forward cabin.
Communication hatch opening to fly bridge.
Sliding doors for security and weather protection.
Flotex carpeting on cabin interior floors.
Upholstered bench and bunk cushions colour matched to Owners choice.
Dual hydraulic steering system with stainless steel steering wheel.
Dual Electronic engine controls.
Swivel helm seat.
Port and starboard upholstered benches, with 4 storage lockers.
Moulded non skid surface with safety rails.
Anchor locker – Self-draining, ahead of collision bulkhead.
2 x Aluminium fuel tanks constructed to marine specifications, complete with full baffles, inspection plate, isolating valve, fill, suction and vent lines.
Useable volume per tank approx. 350litres.
Tank can be dipped or drained through access port in inspection plate.
Remote mounted level gauges, are located at main control station.
Water separator filters and engine primer valves located in storage hatches on aft deck.
Marine approved flexible fuel piping used throughout.
2 x Heavy duty 100amp Delco engine start batteries with isolating switches.
2 x Heavy duty 100amp Delco house batteries with selector switch.
Marine grade switch panel with circuit breakers connected via bus bars.
Marine grade silicone tin wiring.
Heavy duty windscreen wiper.
12 volt air horn.
Low level anti glare cockpit lights on aft deck and on flybridge.
2 x spreader lights to illuminate aft deck.
Bilge pumps, located as specified above, are wired through the switch panel, & have their integral float switches
hot wired to the house batteries.
All fittings are marine grade 316 stainless steel, welded and hand polished.
Hand rails strategically located.
Folding radar arch.
Flybridge bimini top.
6x gunwale mounted rod holders.
Trolling bars with 3 horizontal rod holders each.
6 x Rod holders, for storage, mounted across radar arch base.
1 x Anchor bollard and roller guide.
4 x Heavy duty deck cleats.
1 x Heavy duty bow eye.
2 x Heavy duty transom eyes.
1 x Flybridge access ladder.
1 x Flybridge screen protector with side rails and backrests.
1 x Boarding ladder mounted on swim platform.
1 x 70 litre fresh water tank.
Fixed magnetic compass mounted at main control station.
Antifoul paint applied to hull.
Full safety equipment for 10 persons, required to satisfy SAMSA category B > 9m.
Container with boat’s operating manual, which includes wiring diagrams, mechanical layout etc. as well as manuals of all installed equipment
Twin Yamaha fourstroke outboard engines, 225 hp to 350 hp each with ultra long drive shafts. [ 30 inch.]
Twin Yanmar 6 cylinder diesel engines driving fixed propellors through close coupled V Drive gear boxes.
Fighting Chair & base.
Set of Outriggers.
Lunar tubes – per pair.
2 x Removable, glassfibre, insulated cooler boxes, with upholstered lids, located on aft deck.
Aft Deck cover.
Engine bikini covers.
Removable aft-deck canopy.
Flotex Carpet – Fly-bridge.
Flotex Carpet – Aft deck.
Inverter for 12v-220v conversion with shore power connection.
DUAL STATION NAVNET SYSTEM
Furuno 10 inch Navnet System at main control station (Radar, GPS, Chart Plotter)
Furuno 10 inch Navnet system on Flybridge (Radar, GPS, Chart Plotter)
4KW Radar transmitter
1KW echo sounder transducers for the above
Icom 25 Watt VHF radio with remote microphone for flybridge
Simrad AP16 Autopilot with remote control for fly-bridge.
Marine CD player with speakers located in the main and on the aft deck
30% Deposit with order
20% Upon demoulding of hull
20% Upon fitting of stainless steel, hardware and electrics
20% When boat is ready for sea trials
10% Upon completion of successful sea trials
DELIVERY – ex Factory – Cape Town